Technical Glossary
Test Procedures

Typical Qualification Tests for Crystal Oscillators

Electrical Characteristics Internal Specification Per Specification
Frequency vs. Temperature Internal Specification Per Specification
Mechanical Shock MIL-STD-202, Method 213 100 g's
Vibration MIL-STD-883, Method 2007, A 20 g's Peak to Peak from 10 - 2000 Hz sweep
Thermal Cycle MIL-STD-883, Method 1011, B -55C to +125C, 15 Min Dwell, 10 Cycles
Aging Internal Specification 168 Hours at 105C
Gross Leak MIL-STD-202, Method 112, D 30 Second Immersion, No Bubble Stream
Fine Leak MIL-STD-202, Method 112, C Must Meet 2x10-8 atm-cm3/sec Max.
Solderability MIL-STD-883, Method 2003 8 Hour Steam Age, Must Exhibit 95% Coverage
Resistance to Solvents MIL-STD-883, Method 2015 Three 1 Minute Soaks
Terminal Pull MIL-STD-883, Method 2004, A 2 Pounds
Lead Bend MIL-STD-883, Method 2004, B1 1 bending Cycles
Physical Dimension Internal Specification Per Specification
Internal Visual Internal Specification Per Internal Specification
Soldering Conditions Pin Thru Packages

Surface Mount Devices

260C, for 10s, Max.

260C, for 10s, Max. or  230C, for 90s, Max.